Difference between revisions of "Meteobridge PRO2"

From meteobridge
Jump to: navigation, search
 
(37 intermediate revisions by the same user not shown)
Line 1: Line 1:
==The Next Gen Meteobridge PRO==
+
__NOTOC__
As Meteobridge PRO was launched in 2015 time has come to present an improved successor. We are happy to announce that the PRO2 is now ready for prime time. The success of the Meteobridge PRO over the last years motivated us to keep its basic strengths and to selectively improve capabilities. Top priority was to keep its low energy profile to make it a really carbon footprint friendly device for weather data storage, aggregation, analysis, graphing and publication.
+
==Why A Next Gen Meteobridge PRO?==
 +
[[File:mbpro2-front.gif|right|200px]]As Meteobridge PRO was launched in 2015 time has come to present an improved successor. We are happy to announce that the PRO2 is now ready for prime time. The success of the Meteobridge PRO over the last years motivated us to keep its basic strengths and to selectively improve capabilities. Top priority was to keep its low energy profile to make it a really carbon footprint friendly device for weather data storage, aggregation, analysis, graphing and publication.
 +
Browsing through the new features some might ask, why we did not use a much more powerful base (like an RPI CM4 module). To be honest, we took that into consideration, but the amount of heat these platforms generate and the hefty power demands would eradicate all the benefits the Meteobridge PRO stands for. Meteobridge has always been a showcase to examine how much PC-like functions one can realize with minimal space and power requirements. The ones who don't care much about space and power can still make use of Meteobridge on RPI, which is a pretty capable platform for Meteobridge SW. Having this in mind, I hope you can see the PRO2 as an improvement worth the development work. We also dropped the idea of a Meteobridge PRO2 with and without RF receiver for Davis sensors, the RF function is now always included.
  
===Exteriour===
+
==Exterior==
[[File:mbpro2-front.gif|right|450px]][[File:mbpro2-back.png|right|450px]]The exterior dimensions of the PRO2 are unchanged compared to the PRO. To distinguish it from previous model, the housing is now completely black. Front panel has the same structure as before. You have a reset hole, LEDs for power, status and RF reception, an OLED display and a full size USB2 port. As OLEDs show wear after years of operation, the OLED can now be exchanged more easily and without soldering. Back panel comes with an WLAN and a RF antenna, a micro USB power connecter, an additional micro USB port, an Ethernet socket and a 4-pin I2C port for future expansions (like an I2C temperature/humidity probe that does not breath the warm climate in the PRO2 housing). Beside the I2C there is not much difference compared to the PRO from the outside.
+
[[File:mbpro2-back.gif|right|200px]]The exterior dimensions of the PRO2 are unchanged compared to the PRO. You can distinguish it from the previous model by the completely black housing. Front panel has the same structure as before. You have a reset hole, LEDs for power, status and RF reception, an OLED display and a full size USB2 port. Back panel comes with a WLAN and a RF antenna, a micro USB power connecter, an additional micro USB port, an Ethernet socket and a 4-pin I2C port for future expansions (like an I2C temperature/humidity probe that does not breath the warm climate in the PRO2 housing). Beside the I2C port there is not much difference compared to the PRO from the outside.
  
===Inner Values===
+
==Inner Values==
Meteobriodge PRO2 is no longer driven by the Carambola2 SOC but by the VoCore2 SOC that had its premiere at the Meteobridge NANO. This SOC upgrade gives the PRO2 about 30% more processing punch, reduces power consumption down to an average of 1.5 Watts (WLAN or LAN) operation. While the Meteobridge PRO did heat up noticeably over time, the PRO2 remains hand warm and does not feel hot at all. This is achieved not just by the NEW SOC but also by some changes on how to connect the circuits which can decode Davis Vantage RF signals. The VoCore2 provides double the RAM of the Carambola2 which gives the PRO2 more headroom when running code. As an effect the PHP-based dashboards introduced for Meteobridge NANO SD are now also available on the PRO2.  
+
[[File:mbpro2-board.gif|right|300px]]
 +
====Better CPU====
 +
Meteobridge PRO2 is no longer driven by the Carambola2 SOC but by the VoCore2 SOC (MTK7628AN) that had its premiere with the Meteobridge NANO. This SOC upgrade gives the PRO2 about 30% more processing punch and reduces power consumption of the complete PRO2 down to an average of 1.5 Watts (regardless WLAN or LAN operation). While the Meteobridge PRO did heat up noticeably over time, the PRO2 remains hand warm and does not feel hot at all. The VoCore2 provides double the RAM of the Carambola2 which gives the PRO2 more headroom when running code. As an effect the PHP-based dashboards introduced for Meteobridge NANO SD are now also available on the PRO2.
  
===Future Options===
+
====Better Internal Sensors====
The I2C connector at the back is not the only change to allow for HW addons for the PRO2. The PCB redesign mad it passible to get rid of the separated RF board of the previous model. While the Meteobridge PRO had the main stuff on the base board there was a second board responsible for providing the data storage in terms of an internal USB stick and the RF reception circuitry. The PRO2 has all components (micro SD card for data storage, RF circuitry) on the base board, which gives the option to design a daughter board that can be connected by
+
The PRO2 has an improved internal temperature/humidity sensor (SHT31) and a better barometric sensor (BMP390) compared to the Meteobridge PRO. The external accessibility of the I2C bus that drives internal sensors also allows easy and cheap connection of an I2C external sensor to get true indoor temperature, not affected by warm climate inside the PRO2 enclosure.  
  
* a tiny shape 
+
====Better Data Storage====
 +
The previous model stored data on a 1 GB industrial SLC USB stick. That was a proper solution for the time, but USB sticks draw more power than SD cards, are in general slower and are rather bulky. Meteobridge PRO2 switches to a 16 GB industrial SLC micro SD card, so we get much more room for data, which allows to store per minute sensor data for a decade or more, with a much smaller footprint as before.
  
[[File:temp-2q.png|right|450px]][[File:allinone-24h.png|right|450px]]With the success of Meteobridge the question how to put this to the next level was obviously on the table. Our answer is to get independent from reflashing third party router platforms and to build a platform that ideally suits the need of a Personal Weather Server. Doing so the design goals were easy to set...
+
====Better Display Exchange====
* keep low power foot print and find ways to monitor power use
+
While OLED displays are very crisp and bright they are suffering from wear. After a year of display usage these wear marks will start showing up. To allow for a cheap and easy display exchange it is no longer soldered but put on a socket. That allows the technical experienced user to exchange the display himself. We would prefer to use displays that do not suffer from wear, but currently the OLEDs suitable for a Meteobridge cannot provide this.
* keep size real tiny
+
* get rid of necessary USB hubs
+
* add permanent storage for local data persistence
+
* integrate RF features to directly readout data from Davis sensors
+
* equip with proper RF and WiFi antenna
+
* allow direct GPRS/3G operation with a optional standard USB mobile dongle
+
* add a database for permanent storage of data
+
* allow flexible data exports, where data can be picked up from SMB share or sent via mail of FTP
+
* have some sensors in the box itself (pressure, temp, hum)
+
* some kind of status and data display would be great
+
* sensor data graphing features out of the box would be great
+
  
<!--T:2-->
+
====Better Operating System====
After a quite some months of prototyping and new HW/SW design we are going to release this unique new bundle of dedicated hardware and advanced Meteobridge software as the new '''Meteobridge PRO'''.
+
Meteobridge PRO2 comes with OpenWRT 21.02.3 which solves a lot of SSL related issues of the previous model. SFTP and SSH issues can now take a rest. Furthermore WPA3 and up to date SMB protocols are supported.
  
<!--T:3-->
+
====Better Add-On Options====
You can find a datasheet about the Meteobridge PRO [http://files.meteobridge.com/files/meteobridgepro%20-%20datasheet.pdf here], which summarizes the key features on three pages.
+
The previous model had a two board sandwich-like configuration, where the main computing components were on the base board and above that there was a connected daughter board that holds the USB storage and the circuits for reading Davis RF sensor data. By placing all needed parts on the base board, the PRO2 can host an additional custom daughter board to integrate new features. The daughter board will have access to power, USB, and a serial connection from the base board. Having this upgrade path makes the PRO2 even more future ready. It is obvious that we are currently thinking about 4G/LTE modules or NBIoT modules as possible daughter boards. Please don't take this as an announcement, it is just sharing obvious thoughts.
  
<!--T:7-->
+
==Migration==
Meteobridge PRO can graph weather data in a very versatile way and can feed those graphs to your web server to be integrated into your web presence. You can see some of the predefined examples on the right.
+
Today the PRO2 is nearly identical to the PRO in terms of functions and how to use. If you are new to the Meteobridge PRO/PRO2 please make use of the PRO sections of the wiki, they also apply to the PRO2. Currently only differences are that PRO2 will not support any mobile dongles and does not act as WLAN/LAN bridge for web cams and other equipment that might intend to use the PRO2 as a gateway to the LAN/WLAN or Internet. As this is a very etch case, I don't think 99% of users will even notice that. What users will notice, is that the PRO2 supports an embedded Aurora weather dashboard like the NANO SD does.
  
<!--T:4-->
+
Although the PRO is end-of-life we are committed to continue porting new SW releases to the PRO. However, because the PRO2 offers more to play with, PRO2 will get more attention and features in the next quarters, leaving the PRO more and more behind over time.
Units hit the markets in January 2016. There are two versions, one with the Vantage RF receiving capabilities and the shiny red caps, see picture) and one without (which will have black caps). Units always come fully licensed, license transfer from standard Meteobridges is not planned.
+
  
<!--T:5-->
+
If you migrate from a PRO to a PRO2 the settings file can be ported one-to-one. Porting the database from a PRO to a PRO2 is done via an external USB stick. Meteobridge PRO needs to backup the database to the external USB stick first. Having done that the USB stick is inserted to the Meteobridge PRO2. When you select options to restore database a "USB" marked entry will appear on the PRO2 and you can start importing from there. System log file will tell you when import is done. When restore is completed the external USB stick can be removed.
The introduction of the PRO will not stop further development of the standard Meteobridge. They share 90% of the code and will be both further developed, of course with the PRO offering much more options.
+
  
==Where to Buy?== <!--T:6-->
+
==Availability==
Meteobridge PRO is available from these resellers as a turn-key solution (including license, power supply, Ethernet cable, USB converter cabel):
+
Meteobridge PRO2 is available through the established Meteobridge resellers.  
* '''AmbientWeather''' located in the US sells Meteobridge PRO with RF module as "WeatherBridge PRO". Please visit their [http://www.ambientweather.com/amweatherbridgepro.html online shop] to checkout options and prices.
+
Meteobridge PRO will no longer be produced, effective now. We just have a few units left in case of special requests or for exchanges.
* '''meteo.cc''' located in Switzerland sells Meteobridge PRO with (red) and without (red) RF module as "weatherBoxx PRO". Please visit their [https://www.meteo.cc/weatherBoxx-PRO online shop] to checkout options and prices.
+
* '''Prodata Weather Systems''' located in the UK sells Meteobridge PRO with and without RF module. Please visit their [http://shop.weatherstations.co.uk/sb-04-meteobridge-pro-1041-p.asp website] to check out options and prices.
+
* '''Weerhuisje''' located in the Netherlands sells Meteobridge PRO with and without RF module. Please visit their [http://weerhuisje.nl/index.php?action=article&aid=14085&group_id=10000077&lang=EN website] to check out prices and options.
+
* '''soluzionimeteo.it''' located in Italy sells Meteobridge PRO with and without RF module. Please visit their [https://www.soluzionimeteo.it/19-sistemi-ip website] to check out prices and options.
+
* '''weerspecialist.nl''' located in the Netherlands sells Meteobridge PRO with and without RF module. Please visit their [https://www.weerstationkopen.nl/meteobridge/ online shop] to check out options and prices.
+
* '''meteobridge.shop''' is offering Meteobridge PRO with and without RF module. Please visit their [https://meteobridge.shop/index.php?k=182&lang=eng online shop] to checkout options and prices.
+

Latest revision as of 13:41, 27 May 2024

Why A Next Gen Meteobridge PRO?

Mbpro2-front.gif
As Meteobridge PRO was launched in 2015 time has come to present an improved successor. We are happy to announce that the PRO2 is now ready for prime time. The success of the Meteobridge PRO over the last years motivated us to keep its basic strengths and to selectively improve capabilities. Top priority was to keep its low energy profile to make it a really carbon footprint friendly device for weather data storage, aggregation, analysis, graphing and publication.

Browsing through the new features some might ask, why we did not use a much more powerful base (like an RPI CM4 module). To be honest, we took that into consideration, but the amount of heat these platforms generate and the hefty power demands would eradicate all the benefits the Meteobridge PRO stands for. Meteobridge has always been a showcase to examine how much PC-like functions one can realize with minimal space and power requirements. The ones who don't care much about space and power can still make use of Meteobridge on RPI, which is a pretty capable platform for Meteobridge SW. Having this in mind, I hope you can see the PRO2 as an improvement worth the development work. We also dropped the idea of a Meteobridge PRO2 with and without RF receiver for Davis sensors, the RF function is now always included.

Exterior

Mbpro2-back.gif
The exterior dimensions of the PRO2 are unchanged compared to the PRO. You can distinguish it from the previous model by the completely black housing. Front panel has the same structure as before. You have a reset hole, LEDs for power, status and RF reception, an OLED display and a full size USB2 port. Back panel comes with a WLAN and a RF antenna, a micro USB power connecter, an additional micro USB port, an Ethernet socket and a 4-pin I2C port for future expansions (like an I2C temperature/humidity probe that does not breath the warm climate in the PRO2 housing). Beside the I2C port there is not much difference compared to the PRO from the outside.

Inner Values

Mbpro2-board.gif

Better CPU

Meteobridge PRO2 is no longer driven by the Carambola2 SOC but by the VoCore2 SOC (MTK7628AN) that had its premiere with the Meteobridge NANO. This SOC upgrade gives the PRO2 about 30% more processing punch and reduces power consumption of the complete PRO2 down to an average of 1.5 Watts (regardless WLAN or LAN operation). While the Meteobridge PRO did heat up noticeably over time, the PRO2 remains hand warm and does not feel hot at all. The VoCore2 provides double the RAM of the Carambola2 which gives the PRO2 more headroom when running code. As an effect the PHP-based dashboards introduced for Meteobridge NANO SD are now also available on the PRO2.

Better Internal Sensors

The PRO2 has an improved internal temperature/humidity sensor (SHT31) and a better barometric sensor (BMP390) compared to the Meteobridge PRO. The external accessibility of the I2C bus that drives internal sensors also allows easy and cheap connection of an I2C external sensor to get true indoor temperature, not affected by warm climate inside the PRO2 enclosure.

Better Data Storage

The previous model stored data on a 1 GB industrial SLC USB stick. That was a proper solution for the time, but USB sticks draw more power than SD cards, are in general slower and are rather bulky. Meteobridge PRO2 switches to a 16 GB industrial SLC micro SD card, so we get much more room for data, which allows to store per minute sensor data for a decade or more, with a much smaller footprint as before.

Better Display Exchange

While OLED displays are very crisp and bright they are suffering from wear. After a year of display usage these wear marks will start showing up. To allow for a cheap and easy display exchange it is no longer soldered but put on a socket. That allows the technical experienced user to exchange the display himself. We would prefer to use displays that do not suffer from wear, but currently the OLEDs suitable for a Meteobridge cannot provide this.

Better Operating System

Meteobridge PRO2 comes with OpenWRT 21.02.3 which solves a lot of SSL related issues of the previous model. SFTP and SSH issues can now take a rest. Furthermore WPA3 and up to date SMB protocols are supported.

Better Add-On Options

The previous model had a two board sandwich-like configuration, where the main computing components were on the base board and above that there was a connected daughter board that holds the USB storage and the circuits for reading Davis RF sensor data. By placing all needed parts on the base board, the PRO2 can host an additional custom daughter board to integrate new features. The daughter board will have access to power, USB, and a serial connection from the base board. Having this upgrade path makes the PRO2 even more future ready. It is obvious that we are currently thinking about 4G/LTE modules or NBIoT modules as possible daughter boards. Please don't take this as an announcement, it is just sharing obvious thoughts.

Migration

Today the PRO2 is nearly identical to the PRO in terms of functions and how to use. If you are new to the Meteobridge PRO/PRO2 please make use of the PRO sections of the wiki, they also apply to the PRO2. Currently only differences are that PRO2 will not support any mobile dongles and does not act as WLAN/LAN bridge for web cams and other equipment that might intend to use the PRO2 as a gateway to the LAN/WLAN or Internet. As this is a very etch case, I don't think 99% of users will even notice that. What users will notice, is that the PRO2 supports an embedded Aurora weather dashboard like the NANO SD does.

Although the PRO is end-of-life we are committed to continue porting new SW releases to the PRO. However, because the PRO2 offers more to play with, PRO2 will get more attention and features in the next quarters, leaving the PRO more and more behind over time.

If you migrate from a PRO to a PRO2 the settings file can be ported one-to-one. Porting the database from a PRO to a PRO2 is done via an external USB stick. Meteobridge PRO needs to backup the database to the external USB stick first. Having done that the USB stick is inserted to the Meteobridge PRO2. When you select options to restore database a "USB" marked entry will appear on the PRO2 and you can start importing from there. System log file will tell you when import is done. When restore is completed the external USB stick can be removed.

Availability

Meteobridge PRO2 is available through the established Meteobridge resellers. Meteobridge PRO will no longer be produced, effective now. We just have a few units left in case of special requests or for exchanges.