:Getting Started/1/en
When your router platform has been flashed with Meteobridge firmware, next thing is to connect to the Meteobridge with your browser and to do configuration steps. In its inital state a Meteobridge is configured in LAN mode as DHCP client, expecting an IP from your router. Therefore, it needs to be connected to your router with an Ethernet cable and it needs your router acting as DHCP server and providing an IP address to the Meteobridge as the router also does for your other devices in your LAN. Good thing with DHCP is that you don't have to assign an IP manually. Bad thing is, that only your router knows the given IP and as the Meteobridge does not have a display to show you the IP. But don't worry, there a various ways to find out the IP of the Meteobridge in your LAN.