Difference between revisions of ":Getting Started/16/en"
(Importing a new version from external source) |
(从外部源导入一个新的版本) |
||
| Line 1: | Line 1: | ||
| − | Meteobridge will signal its IP by pulsing the LED beneath the pressed button (TL-MR3020) or the blue LED on the top of the device (TL-WR703N) or the power LED (WL-330N3G). Sequence begins with LED going off, then each of the four numbers (delimited by a dot) will be signaled one by one. The dot between the numbers will be signaled by a "H" (LED shines bright). Each number is signaled by blinking digit per digit. Each digit is represented by a "M" (LED shines medium dimmed) repeated as often as the digit tells us. The zero digit is signaled by ten blinks. After having done this for all digits of all numbers of the IP, the end is signaled by LED staying off a while like it started with. When Sequenze is done, the LED is constantly turned on again. | + | Meteobridge will signal its IP by pulsing the LED beneath the pressed button (TL-MR3020) or the blue LED on the top of the device (TL-WR703N) or the green LED opposite to the power LED (TL-MR3040) or the power LED (WL-330N3G). Sequence begins with LED going off, then each of the four numbers (delimited by a dot) will be signaled one by one. The dot between the numbers will be signaled by a "H" (LED shines bright). Each number is signaled by blinking digit per digit. Each digit is represented by a "M" (LED shines medium dimmed) repeated as often as the digit tells us. The zero digit is signaled by ten blinks. After having done this for all digits of all numbers of the IP, the end is signaled by LED staying off a while like it started with. When Sequenze is done, the LED is constantly turned on again. |
Latest revision as of 13:29, 14 June 2014
Meteobridge will signal its IP by pulsing the LED beneath the pressed button (TL-MR3020) or the blue LED on the top of the device (TL-WR703N) or the green LED opposite to the power LED (TL-MR3040) or the power LED (WL-330N3G). Sequence begins with LED going off, then each of the four numbers (delimited by a dot) will be signaled one by one. The dot between the numbers will be signaled by a "H" (LED shines bright). Each number is signaled by blinking digit per digit. Each digit is represented by a "M" (LED shines medium dimmed) repeated as often as the digit tells us. The zero digit is signaled by ten blinks. After having done this for all digits of all numbers of the IP, the end is signaled by LED staying off a while like it started with. When Sequenze is done, the LED is constantly turned on again.
