Difference between revisions of ":Push Services/67/en"

Latest revision as of 00:34, 31 July 2017

Meteobridge can send largely customized e-mails. To get this service initialized you have to work through the following settings:

Authentication: This drop-down box allows you to define the authentication mode used with the SMTP server. You can choose between:
- none: This setting does not send any authentication information to the SMTP server. Only servers in closed LANs will provide that (if at all).
- basic: Old-fashioned user name and password authentication, without SSL encryption
- tls: authentication with SSL encryption (a variant not used very often)
- starttls: standard authentication with SSL encryption (most often used)
SMTP Host: specifies the IP or name of the SMTP server to use.
Port: port number where SMTP server listens for mails (standard ports are 25 for non-SSL and 587 for SSL communication)
User: user name to be used for authentication
Password: password to be used
To-Addr.: E-mail address of the recipient
From-Addr.: E-mail address of the sender (many SMTP servers only accept mails with a sender address being in the same domain as the SMTP server itself)

@@ Line 1: / Line 1: @@
 ===Sending E-mails===
-Meteobridge can largely customizable e-mails. To get this service initialized you have to work through the following settings:
+Meteobridge can send largely customized e-mails. To get this service initialized you have to work through the following settings:
 * '''Authentication''': This drop-down box allows you to define the authentication mode used with the SMTP server. You can choose between:
 ** none: This setting does not send any authentication information to the SMTP server. Only servers in closed LANs will provide that (if at all).