:Setup Network/1/en

When you can reach meteobridge's web interface this is a proof that your network settings are fine. The Meteobridge application code that presents the web interface is not stored in the non-volatile flash memory of the meteobridge, but gets downloaded from the Internet during boot. So without having the meteobridge connected to the Internet, this will not be there. However, once you have access to the web interface you can make changes to networking to prepare the unit to be operational in another network environment which may need different settings. To get you around the bootstrap problem (how to configure networking when you need networking already configured to be able to do changes in the configuration?) there is a Meteobridge simulator in the Internet, which works as described here.